Strategic Use of Technology Assignment Help

Stage 1:   Strategic Use of Technology
Before you begin work on this assignment, be sure you have read the Case Study on Maryland Technology Consultants (MTC).  MTC is a fictional company created for IFSM 300’s Case Study.  It is also recommended that you review the additional Stages (2, 3 and 4) as well as the vendor brochure provided for Stage 4.  This will help you understand the overall report and potential solution. 

Overview

As a business analyst in the Chief Information Officer’s (CIO’s) department of Maryland Technology Consulting (MTC), you have been assigned to conduct an analysis, develop a set of system requirements, evaluate a proposed solution, and develop an implementation plan for an IT solution (applicant tracking or hiring system) to improve the hiring process for MTC.   This work will be completed in four stages, and each of these four stages will focus on one section of an overall Business Analysis and System Recommendation (BA&SR) report to be delivered to the CIO. 

Section I. Strategic Use of Technology (Stage 1) – The first step is to look at the organization and explain how an IT system could be used to support MTC’s strategies and objectives and support its decision-making processes.

Section II. Process Analysis (Stage 2) – Next you will evaluate current processes and workflow and explain how MTC can use IT to improve its processes and workflow.

Section III. Requirements (Stage 3) –Then you will identify key stakeholder expectations for the new technology solution to support MTC’s hiring process and develop a set of requirements.

Section IV. System Recommendation (Stage 4) – Finally, you will review the provided Vendor brochure for a proposed applicant tracking system and explain how it meets the requirements and what needs to be done to implement the system within MTC.

The sections of the BA&SR will be developed and submitted as four staged assignments. For stages 1, 2, and 3, only the material associated with that stage will be graded. The stage 2, 3, and 4 submissions will include the stage that is due, which will be graded according to the assignment requirements and rubric criteria, as well as include all previously submitted stages with any revisions made.    It is recommended that when preparing stages 2, 3, and 4, you review any feedback from previous assignments to help improve the effectiveness of your overall report and increase the likelihood of a well-written final submission.  For stage 4, the complete BA&SR submission includes grading criteria for evaluating if the document is a very effective and cohesive assemblage of the four sections, is well formatted across all sections and flows smoothly from one section to the next. 

Assignment – BA&SR:   Introduction and Section I. Strategic Use of Technology

Write an appropriate Introduction to the entire BA&SR Report (guidelines are provided below).  Section I of the BA&SR document contains an organizational analysis and identifies ways in which an information system to improve the hiring process can help MTC, the organization in the case study, meet its strategic goals and meet the information needs of various levels of management. 

Using the case study, assignment instructions, Content readings, and external research, develop your Introduction and Section I. Strategic Use of Technology.  To start, review the readings in Weeks 1 and 2.  The case study tells you that the executives and employees at MTC have identified a need for an effective and efficient applicant tracking or hiring system.  As you review the case study, use the assignment instructions to take notes to assist in your analysis.

Use the outline format, headings and tables provided and follow all formatting instructions below.  For Stage 1, create a title page and reference page that will be used for all 4 stages.

Apply specific information from the case study to address each area.

Introduction

Begin your report with a clear, concise, well organized introduction to explain why you are writing and what is to come in the complete BA&SR report (not just Stage 1).  This should briefly set the context for MTC – business purpose, environment, and current challenges related to hiring.  Then specifically provide what is to come in the full report.   Keep your audience in mind – this is an internal report for the CIO of MTC.  Provide an introduction in one paragraph that engages the reader’s interest in continuing to read your report.

I.               Strategic Use of Technology

1. Business Strategy – In this section, you should clearly present – at a broad level – what MTC’s business strategy is (refer to case study information), then what issues the current manual hiring process may present that interfere with achieving that strategy, and how improving the hiring process will benefit MTC and support its business strategy.  (Use two to three strong sentences that explain how the system would support the strategy and justify your position with specifics from the Case Study.)  

• Competitive Advantage – First, provide an overview of the competitive environment that MTC is currently operating in based on information from the case study. Then explain how and why MTC can use the new hiring system to increase its competitive advantage and help achieve its overall business strategy.  Your explanation should demonstrate your understanding of what competitive advantage is as well as how improving the hiring process will help achieve MTC’s competitive advantage. Include how MTC can use the type of data or information that will be in the hiring system to improve its competitive advantage.  (Paragraph of 4-5 sentences)

• Strategic Objectives– Review the four Strategic Goals presented in the Strategic Business Plan section of the MTC Case Study.  The CIO has asked you to come up with an example of an objective to help meet each goal and explain how a new hiring system would help achieve that objective.  As you can see from the example provided in the table below, an objective is a statement that is clear (not vague) and is something that can be measured or evaluated to determine whether it has been met or not. An important part of setting objectives is that they are SMART (specific, measurable, achievable, relevant and time-bound).  In order to evaluate whether an objective has been achieved, it’s important to be able to measure it.  Consider this difference – Student wants to get a degree (non-specific and not measurable) vs.  Student wants to earn a degree in Information Systems Management by May 2020.  (This objective provides specific what and when.)    First, insert an introductory opening sentence for this table.  Then, for each of the rows listed below, complete the table with the requested information.  (Provide an introductory sentence and copy the table.  Create an objective for each of the 3 remaining goals and explain using 2-3 complete sentences for each.)   Note:  This is not about an objective to implement a hiring system or broad business goals but rather the focus is on objectives that would be supported by the use of a technology solution to support/improve the hiring process.

D.    Decision Making – In the reading, “How Information Supports Decision Making,” you were introduced to the information requirements of various levels of the organization.  First, insert an introductory opening sentence for this section.  Then, for each of the management roles listed below, complete the table with the appropriate level (as defined in the reading – one word is all that is required in this column), an example of a specific decision supported by the Hiring System to be made at that level, and what type of information from the hiring system would be needed to support that decision.  Think about what information the hiring system could provide about applicants, etc., and then identify an example of a decision that might be made by each level of management. A decision is a choice or conclusion that the management might make about business operations or future planning.  This is not about the decisions about implementing a new technology solution or about general responsibilities of each role. Example:  A decision example could be stated as:  CEO decides to expand MTC’s services to include cybersecurity.  He can make this decision because the hiring system provides information that many applicants have the needed skills, certifications and experience to enable MTC to easily recruit IT consultants in this area. (Provide an introductory sentence then copy the table and insert information within, writing in complete sentences.) 

Formatting Your Assignment

Consider your audience – you are writing in the role of an MTC business analyst and your audience is MTC and your boss, the CIO.  Don’t discuss MTC as if the reader has no knowledge of the organization.  Also do not reference “stage #” or “case study” – these are class terms and would not be in a business report. Use third person consistently throughout the report.  In third person, the writer avoids the pronouns I, we, my, and ours. The third person is used to make the writing more objective by taking the individual, the “self,” out of the writing. This method is very helpful for effective business writing, a form in which facts, not opinion, drive the tone of the text. Writing in the third person allows the writer to come across as unbiased and thus more informed.

• Create a title page that includes:  The company name, title of report, your name, Course and Section number and date.
• In Stage 1, you are preparing the first part of a 4-stage report.  Use the structure, headings, and outline format provided here for your report.  Use the numbering/lettering in the assignment instructions as shown below.

Introduction

1. Strategic Use of Technology

A.         Business Strategy

B.         Competitive Advantage

C.         Strategic Objectives

D.         Decision Making          

• Write a short concise paper:  Use the recommendations provided in each area for length of response.  It’s important to value quality over quantity.  Assignment should not exceed 4 pages excluding title and reference pages.
• Content areas should be double spaced; table entries should be single-spaced.
• To copy a table:  Move your cursor to the table, then click on the small box that appears at the upper left corner of the table to highlight the table; right click and COPY the table; put the cursor in your paper where you want the table and right click and PASTE the table.
• Ensure that each of the tables is preceded by an introductory sentence that explains what is contained in the table, so the reader understands why the table has been included.
• Use at least two resources with APA formatted citation and reference.  Use at least one external reference and one from the course content. Course content should be from the class reading content, not the assignment instructions or case study itself.  For information on APA format, refer to Content>Course Resources>Writing Resources.
• Begin a Reference Page for resources required for this assignment.  Additional research in the next stages will be added to this as you build the report.  The final document should contain all references from all stages appropriately formatted and alphabetized. Use APA format for your reference page.
• Running headers are not required for this report.
• Compare your work to the Grading Rubric below to be sure you have met content and quality criteria. 
• Submit your paper as a Word document, or a document that can be read in Word.  Keep tables in Word format – do not paste in graphics.
• Your submission should include your last name first in the filename:     Lastname_firstname_Stage_1